Meet the field-ready PowerLink-class PoE + Wi-Fi installation platform built for tower crews, WISP installers, and ISP technicians. This unit combines a switchable 24V / 48V PoE injector, a Wi-Fi hotspot, a TFT diagnostic display, and a Linux-powered automation engine into a single portable device that replaces multiple tools in the field.
Designed around the same principles as the original PowerLink installers rely on, this system lets technicians power radios, verify Ethernet health, run throughput tests, and pre-configure CPEs without needing external injectors, laptops, or AC power.
Installer-first design: On-screen PoE voltage, Ethernet status, battery level, and scripted provisioning ensure faster installs and fewer return visits.
Specifications
- 1.5 inch TFT RGB display
- Passive PoE (Ubiquiti, MikroTik, Cambium, Intracom Telecom, etc.)
- Switchable 24V / 48V – 30W PoE output
- 8-wire power mode supports 802.3at radios
- HotSpot Wi-Fi
- 14,000 mAh battery
- Up to 2 hours runtime at 15W @ 45°C
- Short-circuit, overload, temperature and voltage protection
- OpenWrt / LEDE with full HTML menu and opkg
- VLAN support
- iPerf3 server always running
- Samba 3 file sharing + USB support
- EasyUBNT, Tik-App, UBNT compatibility
- IEEE 802.3 pinout (4-5 +24V, 7-8 GND)
- One-year warranty
Independent Power States
- USB output
- Wi-Fi
- PoE output
Included Accessories
- Hard carrying case
- USB charging cable
- LAN cable
- Cambium swap cable
Physical
- Weight: 280 g
- Dimensions: 86 × 103 × 30 mm
- MT7620 chipset (2.4 GHz)
- Dual internal PCB antennas
Wi-Fi Performance (2.4 GHz)
- 40 MHz — 86 Mbps
- 20 MHz — 43 Mbps
Optional USB 5 GHz AC Adapter
- 80 MHz — 292 Mbps
- 40 MHz — 150 Mbps
- 20 MHz — 72 Mbps
Top Button
- Single click — Wi-Fi ON
- Double click — Wi-Fi OFF
- Long press — LED ON
24V / 48V Button
- Single click — PoE + Wi-Fi ON
- Long press — PoE + Wi-Fi OFF
- Double click — Test mode
Display Indicators
- Battery level
- PoE voltage
- Ethernet link state (full / half / unplugged)
- Power delivered
- Config success or failure
LED Status
- Blue — Ethernet
- Red — Wi-Fi
- Yellow — Battery
- Orange — Power
Battery LED
- Blinking — Charging
- Solid — Fully charged
- Solid while in use — Discharging
- Blinking — Low battery
Need help deploying this into your WISP or ISP workflow? Link Technologies, Inc. provides hardware, scripting, and provisioning systems for Ubiquiti, MikroTik, Cambium, and multi-vendor networks. Contact
sales@linktechs.net or call 314-735-0270.
